SucheSuchen
OfflineSie sind aktuell nicht angemeldet:
Icon KeyLogin      Icon RegistrierungRegistrierung

Detailansicht

Ready to Rotate

Furtwangen, 19.11.2026 (PresseBox) - To connect two shafts together, you need a coupling. But not all couplings are alike, as can be seen by a glance at the diverse range of shaft and compensating couplings offered by Ganter.

Transmitting power and torque calls for different designs that are required in a drive train for position and motion control. In the latter case, zero backlash rotation, torsional stiffness, precise positioning and agile movement are the order of the day. In contrast to power transmission, this motion control use case generally involves only low levels of torque. The criteria for identifying the right type of coupling also depend on the size of the alignment and runout errors to be compensated, the axial movements of the two shafts and the vibrations present within the system as a whole. Any deviations or deficiencies lead to increased wear, vibrations and noise, which can pose issues even when the environment is not particularly quiet in the first place.

This wide range of specific requirements is seamlessly addressed by Ganter?s selection of shaft couplings. If the focus lies on power transmission, such as in conveying or pumping systems, one of the elastomer jaw couplings GN 2240 or GN 2241 might be a good choice. Thanks to versions featuring coupling spiders with different hardness values, the properties of the coupling can be easily adapted to the specific requirements. They are available with a Shore hardness of 80, 92 or 98. The separable couplings make assembly quick and easy, and hub clamping is accomplished with either a set screw or clamping hub. An optional keyway also allows for a defined installation angle as well as a positive connection for transmitting torque. The same applies to the Oldham couplings GN 2242 and GN 2243, both with POM spacers ? these couplings can compensate for even large shaft misalignments.

When it comes to motion control applications, the bellows couplings GN 2244 offer good torsional stiffness for precise operations. But if torsional stiffness is not a key requirement, beam couplings GN 2246 or double loop couplings GN 2250 are also suitable options. These unusually shaped coupling types compensate for larger misalignments, dampen vibrations and also provide thermal and electrical isolation between the shafts. For use in a food handling context or in corrosive environments, Ganter offers versions that combine the FDA-compliant material TPE for the loops and stainless steel quality class 4 for the shaft bushings. High response couplings of the GN 2248 series, on the other hand, dampen vibrations while transmitting torque with zero backlash thanks to an integrally bonded rubber element.

For applications that involve extending a shaft or mounting components such as overhung agitator blades, Ganter?s range includes the rigid couplings GN 2260. These are manufactured as a single piece with a slot on one side and are secured to each shaft end by a pair of socket cap screws. Their counterpart, available as GN 2264, is split into two halves for easier installation and can be mounted radially as well, secured with a total of eight screws. GN 2262 has the same slotted design as GN 2260 but is made of aluminum, giving it low inertia and making it suitable for high acceleration and rotational speeds of up to 39,000 rpm. All rigid models are available with or without keyway.

More information on Ganter standard parts can be found on the internet at ganternorm.com

Partnerportale:   seminarSPIEGEL | Initiative Mittelstand | PresseBox | aktiv-verzeichnis.de